Air Quality Monitors Ltd is the appointed UK distributor for Ecotech. Ecotech manufactures the Serinus range of gas analysers. The new Serinus range continues to evolve with improved appearance, functionality and performance.
Offering improvements in communication, programmability and usability, Ecotech's latest upgrade to the Serinus analysers provides a solution that is second to none for use in ambient and emissions monitoring systems.
Serinus 30 Carbon Monoxide Analyser
The Serinus 30 Carbon Monoxide analyser delivers precise and reliable performance at excellent value. It uses proven NDIR gas filter correlation technology to measure CO in ambient air (LDL <40 ppb, range 0-200ppm).
The Serinus range of analysers have been designed using our experience and knowledge gained from operating large air quality monitoring networks for more than 35 years. The result, instruments that integrate seamlessly into continuous monitoring networks.
Full Product Details
Serinus 40 Oxides of Nitrogen Analyser
The Serinus 40 Oxides of Nitrogen analyser delivers precise and reliable performance at excellent value. It uses proven chemiluminescence technology to measure NO, NO2 and NOx in ambient air (LDL <0.4ppb, range 0-20ppm).
The Serinus range of analysers have been designed using our experience and knowledge gained from operating large air quality monitoring networks for more than 35 years. The result, instruments that integrate seamlessly into continuous monitoring networks.
Full Product Details
Serinus 44 Ammonia Analyser
The Serinus 44 analyser delivers precise and reli- able performance at excellent value. It uses proven chemiluminescence technology and an external thermal catalytic converter to measure to measure NO, NO2, NOX and NH3 in ambient air (LDL <0.4ppb, Range 0-20ppm).
The Serinus range of analysers have been designed using our experience and knowledge gained from operating large air quality monitoring networks for more than 35 years. The result, instruments that integrate seamlessly into continuous monitoring networks.
Full Product Details
Serinus 51 SO2/H2S Analyser
The Serinus 51 analyser delivers precise and reliable performance at excellent value. It combines fluorescence detection with an internal catalytic converter to sequentially measure H2S and SO2 in the range of 0-2/0-20 ppm respectively with a detection limit of 0.3 ppb.
The measurements involves two cycles.
- H2S is measured by passing the sample through an internal SO2 scrubber which removes any SO2, the H2S is then converted to SO2 using the internal converter and measured using the fluorescence technique.
- SO2 is then sequentially measured by bypassing the SO2 scrubber and converter and using the fluorescence technique to only measure the SO2 concentration.
Full Product Details
Serinus 55 Hydrogen Sulphide Analyser
The Serinus 55 Hydrogen Sulphide analyser (H2S) analyser delivers precise and reliable performance at excellent value. It uses proven UV fluorescent radiation technology and an internal thermal catalytic converter to measure H2S in ambient air (LDL <0.3ppb, range 0-2ppm).
H2S is measured by passing the sample through a SO2 scrubber which removes any SO2, the H2S is then converted to SO2 using the internal H2S converter and measured using the fluorescence technique.
Full Product Details
Serinus 56 Total Sulphides Analyser
The Serinus 56 Total Sulphides analyser delivers precise and reliable performance at excellent value. It uses proven UV fluorescent radiation technology and a thermal converter to measure TS in ambient air (LDL <0.3ppb, Range 0-10 ppm).
TS is measured by converting TS to SO2 using the external HTO1000 converter and then measuring the resultant SO2 using the fluorescence technique.
The Serinus range of analysers have been designed using our experience and knowledge gained from operating large air quality monitoring networks for more than 35 years. The result, instruments that integrate seamlessly into continuous monitoring networks.
Full Product Details
Serinus 57 Total Reduced Sulphides Analyser
The Serinus 57 Total Reduced Sulphides analyser delivers precise and reliable performance at excellent value. It uses proven UV fluorescent radiation technology and a thermal converter to measure TRS in ambient air (LDL <0.3ppb, Range 0-10 ppm).
TRS is measured by converting TS to SO2 using the external HTO1000 converter and then measuring the resultant SO2 using the fluorescence technique.
The Serinus range of analysers have been designed using our experience and knowledge gained from operating large air quality monitoring networks for more than 35 years. The result, instruments that integrate seamlessly into continuous monitoring networks.
Full Product Details
EC9820 Carbon Dioxide Analyser
The EC9820 Carbon Dioxide Analyser combines microprocessor control with NDIR gas filter correlation photometry detection to measure CO2 with minimal interference from CO and H2O
The CO2 concentration is automatically corrected for gas temperature/pressure changes and can be displayed in units of ppm or mg/m3. The EC9820 allows for a manual, timed or remote initiated zero/ span calibrations.
Full Product Details
EC9843 Total Reactive Nitrogen Oxides Analyser
The EC9843 Total Reactive Nitrogen Oxides Analyser combines microprocessor control with chemiluminescence detection to measure NO and NOy in the ranges of 0-2000 ppb with a detection limit of 50 ppt.
Improved sensitivity, noise, and zero drift specifica- tions are obtained through the use of a superior low pressure reaction cell and an electronics suite to provide better all round performance.
The EC9843 is used in conjunction with a NOy-1000 converter used for the conversion of NOy to NO for analysis.
Full Product Details
EC9850TS Total Sulfur Analyser
The EC9850TS Total Sulfur Analyser combines microprocessor control, high performance, total reduced sulfur converter and fluorescence detection to measure total sulfur (TS). Total sulfur represents the sum of SO2 and all total reduced sulfur (TRS) species.
TS concentration is automatically corrected for gas temperature/pressure and can be displayed in units of ppm, ppb, μg/m3 or mg/m3.
The TRS converter uses a high temperature thermal oxidizer to oxidize all sulfur species to SO2. The output from the converter is SO2 and all the TRS converted to SO2. This output is then measured by fluorescence detection which utilises the resultant emitted radiation produced by SO2 molecules when excited by UV radiation.
The UV radiation excitation is measured by a reference detector and the fluorescence radiation
is measured by a photomultiplier tube. The output signal is the ratio of these two measurements which accounts for any effects due to variable lamp intensity or optical interference.
Full Product Details
YESAIR 8-Channel IAQ Monitor
YESAIR offers more features, flexibility and functionality than any other IAQ instrument on the market today with multi-channel operation, more than 30 different plug and play sensors to select from, including a particulate sensor, huge capacity data logging to SD flash card and much more.
Featuring an eight channel sensor capacity including RH and temperature, YESAIR can handle up to five additional internal plug and play sensors consisting of a maximum of three electrochemical toxic gas or oxygen sensors plus two high current draw sensors such as an infrared PID or catalytic, and a remote particulate sensor such as the YESDUST.
Positive sampling with internal pump ensures good representative samples are taken from all target areas or with diffusion for a quick, direct reading. Eight sensors are viewed live on the multi-line, backlit, LCD display as well as battery and data logging status.
The optional YES logger package consists of a 2 GB SD flash card, USB cable, YES viewer software, and SD flash card reader. The SD flash card reader stores the data and can be transferred. Alternatively, data could be downloaded through the instrument using a standard USB connection, the YES viewer PC software will allow users to analyse and graph data.
Full Product Details
AQM60
The AQM60 Air quality station is compact and designed for low-cost and easy deployment in an air quality monitoring network. The AQM60 station offers long term quantitative, time integrated atmosphere measurements with excellent correlation to reference methods. Conventional air quality stations by comparison are expensive, bulky, power-hungry, and require a rigorous calibration and maintenance program. Such limitations often make then unsustainable for micro-scale and high-density monitoring.
The AQM60 station boasts a highly flexible instrument platform configurable to measure common air pollutants including ozone (O3), Nitrogen dioxide (NO2), Nitrogen oxides (NOx), carbon monoxide (CO), Sulphur dioxide (SO2), volatile organic compounds (VOC), Hydrogen sulphide (H2S), non-methane hydrocarbons (NMHC), carbon dioxide (CO2), Particulate matter (PM10, PM2.5), noise and meteorological parameters such as temperature, humidity, wind speed and direction.
